Custom Designer Order Form: Print this form and take it to a dealer nearest you!
(Gemstone does not sell directly to consumers.)

1. Customer Information

Bill to Name and Address:
Name:                   
Address:                
City:                      State:        Zip:
Phone:                   E-mail:

Ship to Name and Address: (type same in name field if ship to is the same as bill to)
Name:                   
Address:                
City:                      State:        Zip:
Phone:                   E-mail:

2. Vanity Top Color
Type name of color  here

2a. Dimensions
Select desired standard depth and fill in length. Tops can be sized to 1/4 of an inch. Tolerance will be + 1/8".
Depth    19 1/4"    22 1/4"
Length minimum of 25", maximum of 97"

3. Vanity Bowl
Based on vanity top size, choose from a standard bowl (included), or one of the upgrades listed below. Then choose any color from the color selections. See special note on darker colors.
19-1/4" tops          22-1/4" tops
                         
1610 16"X10"         1613* 16"X13"       1321 21"X13"           2114 21"X14"
      standard                     standard                   upgrade                       upgrade
Solid Surface Bowl       Solid Surface Bowl      Solid Surface Bowl         Solid Surface Bowl
     (Included)                   (included)                  add $59.00                   add $84.00
                                 *only bowl available for 25" single bowl & 49" double bowl tops
Bowl Color: Any offered color - not just white or "off whites"

Please Note:

Prices listed are subject to change without prior notice. Use these figures to obtain an estimate of your final cost.

4. Bowl Placement





Single Bowl
Centered or
inches from left edge to bowl center


Double Bowl
Available on vanity tops of 49" or greater for additional charge of $243.00
Bowl A is inches from left edge to bowl center minimum 12"
Bowl B is inches from right edge to bowl center minimum 12"

5. Faucet Hole Configuration
Standard setback for holes is approximately 2 1/4" from back of bowl to center of hole. All faucet holes will be 1 3/8" in diameter.

None        Single Hole        4" Spread        8" Spread        8" Offset
8" Offset spread not available on 19" depth vanity tops

6. Edge Profiles
Standard Eased (included)
Ogee (additional charge $40)
Modified Ogee (additional charge $40)
Chamfer (additional charge $40)
Roundover (additional charge $40)
Bullnose (additional charge $50)

Edge Profile Location (mark each appropriate box to receive an edge profile)
front     right     left

 

7. Wall Location
It is important to specify the location of side walls that will be flush against the vanity top to assure proper edge buildup.
None    Left     Right

8. Side Splash (set on)
None     Left ($42)     Right ($42)     Both ($84)

9. Vanity Top Prices

Please Note:

Prices listed are subject to change without prior notice. Use these figures to obtain an estimate of your final cost.

Vanity Top Length	Price	Vanity Top Length	Price
25" Single Bowl	$803	Up to 61" Single Bowl	$1543
up to 31" Single Bowl	$893	Up to 73" Single Bowl	$1793
up to 37" Single Bowl	$993	Up to 85" Single Bowl	$2106
up to 43" Single Bowl	$1153	Up to 97" Single Bowl	$2333
up to 49" Single Bowl	$1223

10. Calculate Order

Vanity Top Price (see step 9)	803 893 993 1153 1223 1543 1793 2106 2333
Upgrade Bowl Price (see step 3)	0 59 84
Double Bowl Price (see step 4)	0 243
Edge Profile Price (see step 6)	0 40 50
Side Splash Price (see Step 8)	0 42 84
Total Vanity Top Price

Having reviewed all of the custom selections chosen above, I understand that my vanity top is a custom order and therefore is non-returnable, and that my selections cannot be cancelled or modified once the order has been submitted.